Micro balance AND LCCA21N200

Micro balance AND LCCA21N200

The Micro balance AND LCCA21N200 is a compression-type load cell with an integrated amplifier, designed for compact and precise force measurement in applications such as press force monitoring, button actuation testing, component inspection, and load distribution analysis. With a rated capacity of 200 N (approximately 20.4 kg) and a factory-calibrated 1–4 V analog voltage output, this sensor offers an ideal solution for systems requiring quick integration, stable signal, and minimal calibration effort.

With IP64-rated environmental protection, a built-in amplifier, and standard mounting accessories included, the LCCA21N200 is suited for both production systems and testing environments where space and signal consistency are critical.

Key Features

• Compression Type Sensor:
  Measures compressive force only, ideal for downward load sensing in presses, test rigs, and embedded force detection.

• Rated Capacity:
  200 N (≈20.4 kg) — suitable for medium-range low-force measurement in industrial or lab applications.

• Built-in Amplifier with Analog Output:
  Provides a 1 to 4 V output, linear with applied force:

  • 0% Load = 1 V

  • 100% Load = 3 V

  • 150% Load = 4 V

• Power Supply:
  Operates at 5 V DC ±0.25 V, with a current draw of ≤ 16 mA.

• Zero and Span Voltage:

  • Zero Voltage: 1 ±0.04 V

  • Span Voltage: 2 ±0.01 V

• Frequency Response:
  100 Hz (–3 dB) – supports moderate-speed dynamic measurements.

• Excellent Environmental Protection:

  • Dust/Water Rating: IP64

  • Operating Temp Range: –10 to 80°C

  • Compensated Temp Range: 0 to 70°C

• High Durability:

  • Allowable Overload: 150% of Rated Capacity

  • Insulation Resistance: ≥ 500 MΩ (DC 50 V, between signal and load cell)

• Accessories Included:

  • Mounting holder

  • Amplifier case holder

Cable Configuration

• Load Cell to Amplifier: Ø2 mm, 2 meters

• Amplifier Output Cable: Ø6 mm, 0.5 meters

• Wire Color Code:

  • Red: Power +

  • White: Power –

  • Green: Output +

  • Blue: Output –

  • Yellow: Shield

Typical Applications

• Press Machine Force Monitoring
  For monitoring force in compact stamping or assembly operations.

• Component Testing and Inspection
  Measuring the compressive load in springs, mechanical parts, or structural components.

• Button and Switch Testing
  Force evaluation in keyboards, membrane switches, and control panels.

• Load Distribution Measurement
  Used in system design and QA to ensure even weight distribution.

• Embedded Robotics and Automation
  Compact enough to install in robotic grippers or feedback systems.

Technical Specifications Summary