Chlorine Analyzer (Panel Only) CLF10 sc Free with pHD Differential Sensor Hach

Here is a paraphrased version of the provided text:

The CLF10 sc Free Chlorine Analyzer continuously measures free chlorine for real-time process control. Utilizing amperometric technology, it is fully compatible with all Hach digital controllers. The CLF10 sc is suitable for a wide range of municipal and industrial applications, particularly where waste stream management is a concern. This analyzer also includes a pH sensor to work with the advanced Cal Watch diagnostic feature.

Specifications for CLF10 sc Free Chlorine Analyzer:

• Accuracy:
  • Free Chlorine: ±3% of the reference test (DPD) at a constant pH less than 7.2 (±0.2 pH units)
  • Free Chlorine: ±10% of the reference test (DPD) at a stable pH less than 8.5 (±0.5 pH units from the calibration pH)
  • Total Chlorine: ±10% of the reference test (DPD) at a stable pH less than 8.5 (±0.5 pH units from the calibration pH)
  • Total Chlorine: ±20% of the reference test (DPD) at a stable pH greater than 8.5
• Cable Connection: 5-pin, M12 connector
• Cable Length: 1 meter (between gateway and sc controller)
• Calibration Method: 1-point or 2-point (zero and slope) calibration
• Certifications:
  • CE compliant for conducted and radiated emissions: CISPR 11 (Class A limits)
  • EMC Immunity EN 61326-1 (Industrial limits)
  • Additional certifications when connected to an sc controller
• Connection Drain Line: 1/2 inch ID
• Connections: 1/4 inch OD
• Controller: Panel only
• Controller Compatibility: sc controller platform
• Description: CLF10sc Free Chlorine Analyzer (Panel Only) with pHD Differential Sensor
• Dimensions: Sensor Only: 195 mm x 25 mm (7.68 in x 0.98 in)
• Fitting Type: USA
• Includes: CL10sc Panel, 1 meter digital extension cable, Panel Manual, pHD Sensor Manual, Chlorine Sensor Manual
• Interferences:
  • Free chlorine: Monochloramine, chlorine dioxide, ozone, and chalk deposits
  • Total chlorine: Chlorine dioxide, ozone, and chalk deposits
• Length: Sensor: 195 mm
• Lower Limit of Detection (LOD): 30 ppb (0.03 ppm)
• Material: Corrosion-resistant materials, fully-submersible (stainless steel, PEEK, PVC, silicon rubber, and polycarbonate)
• Measurement Method: Reagentless, electrochemical, three-electrode amperometric system
• Mounting: Panel or Wall Mounting
• Operating Temperature Range: 0 – 45 °C
• Options: pHD Differential Sensor
• Parameter: Free Chlorine
• pH Monitoring Required?: With pHD Differential Sensor
• pH Range: 4 – 9
• Power Requirements (Voltage): None
• Pressure Range: 0.5 bar, no pressure impulses and/or vibrations
• Range: 0 – 20 ppm Cl₂
• Repeatability: 30 ppb or 3%, whichever is greater
• Response Time:
  • Total Chlorine: 100 seconds or less for 90% change (T90) at a stable temperature and pH
  • Free Chlorine: 140 seconds or less for 90% change (T90) at a stable temperature and pH
• Sample Flow Rate: 30 – 50 L/h (7.9 – 13.2 gal/hour), Optimal is 40 L/hour (10.5 gal/hour)
• Sample Temperature: 5 – 45°C (41 – 113°F)
• Sampling Time: Continuous
• Storage Conditions: -20 °C to 60 °C, dry
• Warranty: 12 months
• Weight: 11.2 kg, approximately 5.5 kg (12 lbs) for the panel and empty panel-mounted components
• What’s Included?: CL10 sc Panel, 1 meter digital extension cable, Panel Manual, pHD Sensor Manual, Chlorine Sensor Manual