Standard delivery Steriliser SN30plus Memmert

Jual Standard delivery Steriliser SN30plus Memmert

The SN30 Standard Delivery Steriliser is designed to provide reliable and precise sterilisation, featuring advanced controls and safety mechanisms to ensure optimal performance in laboratory settings.

Standard delivery Steriliser SN30plus Memmert Temperature Specifications

• Setting Temperature Range: +20 to +250 °C
• Setting Accuracy: Up to 99.9 °C: 0.1 / from 100 °C: 0.5
• Working Temperature Range: At least 5 °C above ambient temperature to +250 °C
• Temperature Sensor: 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring and error handling

Control Technology

• ControlCOCKPIT: TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays
• Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
• Function SetpointWAIT: Process time does not start until the set temperature is reached
• Calibration: Three freely selectable temperature values
• Adjustable Parameters: Temperature (Celsius or Fahrenheit), air flap position, programme time, time zones, summertime/wintertime

Ventilation

• Convection: Natural convection
• Fresh Air: Pre-heated fresh air admixture by electronically adjustable air flap
• Vent: Vent connection with restrictor flap

Communication

• Documentation: Programme stored in case of power failure
• Programming: AtmoCONTROL software on a USB stick for programming, managing, and transferring programmes via Ethernet interface or USB port

Safety

• Temperature Control:
  • Mechanical temperature limiter TB, protection class 1 according to DIN 12880, switches off heating approximately 20°C above nominal temperature
  • Overtemperature monitor TWW, protection class 3.1 or adjustable temperature limiter TWB, protection class 2, selectable on display
• AutoSAFETY: Integrated over- and undertemperature monitor “ASF”, automatically follows the setpoint value at a preset tolerance range, with alarm in case of over- or undertemperature, and heating is switched off in case of overtemperature
• Autodiagnostic System: For fault analysis
• Alarm: Visual and acoustic

Standard Equipment

• Works Calibration Certificate: Calibration at +160°C
• Door: Fully insulated stainless steel door with 2-point locking (compression door lock)
• Internals: 1 electropolished stainless steel grid
• Stainless Steel Interior: Easy-to-clean, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
• Volume: 32 l
• Dimensions (Interior): 400 x 320 x 250 mm (w x h x d)
• Max. Number of Internals: 3
• Max. Loading of Chamber: 60 kg
• Max. Loading per Internal: 20 kg
• Textured Stainless Steel Casing
• Dimensions (Exterior): 585 x 704 x 434 mm (w x h x d, +56 mm door handle)
• Housing: Rear zinc-plated steel

Electrical Data

• Voltage Electrical Load:
  • 230 V, 50/60 Hz, approx. 1600 W
  • 115 V, 50/60 Hz, approx. 1600 W

Ambient Conditions

• Setup: Minimum distance of 15 cm from the wall, 20 cm from the ceiling, and 5 cm from side walls or nearby appliances
• Altitude of Installation: Max. 2,000 m above sea level
• Ambient Temperature: +5 °C to +40 °C
• Humidity RH: Max. 80%, non-condensing
• Overvoltage Category: II
• Pollution Degree: 2

Packing/Shipping Data

• Transport Information: Appliances must be transported upright
• Customs Tariff Number: 8419 8998
• Country of Origin: Federal Republic of Germany
• WEEE-Reg.-No.: DE 66812464
• Dimensions (Including Carton): 660 x 890 x 650 mm (w x h x d)
• Net Weight: Approx. 46 kg