Steriliser SN55plus Memmert Twin DISPLAY

Jual Steriliser SN55plus Memmert Twin DISPLAY

Steriliser SN55plus Memmert Standard Delivery Steriliser

The SN55plus Standard Delivery Steriliser is designed to provide precise and reliable sterilisation with advanced features to ensure safety and performance. The Setpoint Wait function ensures the sterilisation programme only starts once the set temperature is reached, ensuring reliable and consistent results.

Temperature Specifications

• Setting Temperature Range: +20 to +250 °C
• Setting Accuracy: Up to 99.9 °C: 0.1 / from 100 °C: 0.5
• Working Temperature Range: At least 5 °C above ambient temperature to +250 °C
• Temperature Sensor: 2 Pt100 sensors DIN Class A in 4-wire circuit for mutual monitoring, taking over functions in case of an error

Control Technology

• ControlCOCKPIT: TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays
• Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
• Function HeatBALANCE: Adapting the distribution of the heating performance of the upper and lower heating circuit from -50% to +50%
• Function SetpointWAIT: Process time does not start until the set temperature is reached
• Calibration: Three freely selectable temperature values
• Adjustable Parameters: Temperature (Celsius or Fahrenheit), air flap position, programme time, time zones, summertime/wintertime

Ventilation

• Convection: Natural convection
• Fresh Air: Admixture of pre-heated fresh air by electronically adjustable air flap
• Vent: Vent connection with restrictor flap

Communication

• Documentation: Programme stored in case of power failure
• Programming: AtmoCONTROL software on a USB stick for programming, managing, and transferring programmes via Ethernet interface or USB port

Safety

• Temperature Control: Mechanical temperature limiter TB, protection class 1 according to DIN 12880, to switch off the heating approximately 20 °C above nominal temperature
• Overtemperature Monitor: TWW, protection class 3.1 or adjustable temperature limiter TWB, protection class 2, selectable on display
• AutoSAFETY: Integrated over- and undertemperature monitor “ASF”, automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature
• Autodiagnostic System: For fault analysis
• Alarm: Visual and acoustic

Standard Equipment

• Works Calibration Certificate: Calibration at +160 °C
• Door: Fully insulated stainless steel door with 2-point locking (compression door lock)
• Internals: 1 electropolished stainless steel grid
• Stainless Steel Interior: Easy-to-clean, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
• Volume: 53 l
• Dimensions (Interior): 400 x 400 x 330 mm
• Max. Number of Internals: 4
• Max. Loading of Chamber: 80 kg
• Max. Loading per Internal: 20 kg
• Textured Stainless Steel Casing
• Dimensions (Exterior): 585 x 784 x 514 mm (depth +56 mm door handle)
• Housing: Rear zinc-plated steel

Electrical Data

• Voltage Electrical Load:
  • 230 V, 50/60 Hz, approx. 2000 W
  • 115 V, 50/60 Hz, approx. 1700 W

Ambient Conditions

• Setup: Minimum distance of 15 cm from the wall, 20 cm from the ceiling, and 5 cm from side walls or nearby appliances
• Altitude of Installation: Max. 2,000 m above sea level
• Ambient Temperature: +5 °C to +40 °C
• Humidity RH: Max. 80%, non-condensing
• Overvoltage Category: II
• Pollution Degree: 2

Packing/Shipping Data

• Transport Information: Appliances must be transported upright
• Customs Tariff Number: 8419 8998
• Country of Origin: Federal Republic of Germany
• WEEE-Reg.-No.: DE 66812464
• Dimensions (Including Carton): 730 x 950 x 670 mm
• Net Weight: Approx. 57 kg
• Gross Weight (Carton): Approx. 76 kg