Memmert Water bath WTB6

Jual Memmert Water bath WTB6

Perfect for regulating the temperature of ointments, emulsions, samples, plates, and nutrient solutions in the laboratory, as well as for warm storage and calibration in industrial applications.

Memmert Water bath WTB6 information :

Temperature Control Features

• Temperature Sensor: Digital temperature sensor mounted externally on the bath.
• Temperature Settings: Adjustable in Celsius or Fahrenheit.
• Operating Temperature Range: From at least 5°C above ambient to +100°C (with cover, depending on ambient pressure).
• Temperature Setting Range: +10°C to +100°C.
• Temperature Setting Accuracy: ±0.1°C.

Control Technology

• Calibration: Two-point calibration.
• Controller: Intuitive 3.5″ color graphic display with touch screen.
• Display: Digital readout of set and actual temperatures and (remaining) program time.

Safety

• Temperature Control: Two-stage safety system to prevent overheating (pressure sensor for level monitoring, thermal fuse for heating shutdown in case of error).
• Overtemperature Alarm: Individually adjustable with visual and acoustic signals.
• Independent Temperature Limiter: Switches off heating in case of failure.
• Autodiagnostic System: Microprocessor PID-temperature controller with integrated autodiagnostic system and fault indicator.

Heating Concept

• Heating Element: Corrosion-proof large-area heating located on the exterior of the interior.

Standard Equipment

• Cover: Stainless steel gable cover.
• Drain System: Innovative, easy-to-empty drain system.
• Timer: Digital timer from 1 minute to 99 hours 59 minutes with visual and acoustic alerts.
• Interior: Deep-drawn stainless steel tray (W.St. 1-4301), without corners or edges for easy cleaning, including central drain.

Dimensions

• Interior Dimensions: l(A) x w(B) x h(C): 277 x 217 x 150 mm.
• Volume: 7.5 liters.
• Minimum Liquid Level: 40 mm.
• Maximum Liquid Level: 114 mm.
• Exterior Dimensions: l(D) x w(E) x h(F2): 479 x 289 x 375 mm.

Electrical Data

• Voltage/Load:
  • 230 V, 50/60 Hz, approximately 1000 W.
  • 115 V, 50/60 Hz, approximately 1000 W.

Ambient Conditions

• Installation: Ensure ventilation openings on the left and back are unobstructed. Maintain a minimum distance of 100 mm from the sides and 150 mm from the rear. Minimum spacing of 750 mm from the top of the bath to the ceiling.
• Ambient Temperature: +5°C to +40°C.
• Humidity: Max. 80% relative humidity, non-condensing.
• Overvoltage Category: II.
• Pollution Degree: 2.

Water Bath

• Packing/Shipping Dimensions: l x w x h: 579 x 389 x 475 mm.
• Transport Information: The appliance should be transported upright.
• Customs Tariff Number: 8419 8998.
• Country of Origin: Federal Republic of Germany.
• WEEE-Reg.-No.: DE 66812464.
• Net Weight: Approximately 11 kg.
• Gross Weight (Carton): Approximately 13 kg.