MEMMERT UN 30 Universal Oven Laboratorium
The UN30 is a classic, universally applicable lab oven from Memmert designed for temperature control in research, science, and material tests in various industries. It features high-quality stainless steel construction, advanced control technology, and a range of safety and ventilation features.
MEMMERT UN 30 Universal Oven Laboratorium Specifications:
Temperature:
- Working Temperature Range:
- At least 5°C above ambient temperature to +300°C (UN/UNplus/UNm/UNmplus models).
- At least 10°C above ambient temperature to +300°C (UF/UFplus/UFm/UFmplus models).
- Setting Temperature Range: +20°C to +300°C.
- Setting Accuracy:
- Up to 99.9°C: 0.1°C.
- From 100°C: 0.5°C.
- Temperature Sensor: 1 Pt100 sensor DIN class A in 4-wire-circuit.
Control Technology:
- Controller: ControlCOCKPIT with SingleDISPLAY:
- Adaptive multifunctional digital PID microprocessor controller with a high-definition TFT color display.
- Timer:
- Digital backwards counter with target time setting, adjustable from 1 minute to 99 days.
- SetpointWAIT Function: The process time starts when the set temperature is reached.
- Calibration: Three freely selectable temperature values.
- Adjustable Parameters: Temperature (Celsius/Fahrenheit), air flap position, program time, time zones, summertime/wintertime adjustments.
Ventilation:
- Convection: Natural convection.
- Fresh Air: Pre-heated fresh air can be mixed via an electronically adjustable air flap.
- Vent: Connection with restrictor flap for venting.
Communication:
- Documentation: Programme stored in case of power failure.
- Programming: AtmoCONTROL software for reading, managing, and organizing data via Ethernet interface (trial version available). USB stick with AtmoCONTROL software is optional.
Safety Features:
- Temperature Control:
- Adjustable electronic overtemperature monitor.
- Mechanical temperature limiter (TB) as per DIN 12880, protection class 1, which shuts off heating approximately 20°C above the set temperature.
- Autodiagnostic System: For fault analysis.
Standard Equipment:
- Works Calibration Certificate: Calibration at +160°C.
- Door: Fully insulated stainless steel door with 2-point locking (compression door lock).
- Internals: Includes 1 stainless steel grid (electropolished).
- Stainless Steel Interior: Easy to clean, reinforced by ribbing with integrated heating on four sides.
- Volume: 32 liters.
- Internal Dimensions: 400 mm (W) x 320 mm (H) x 250 mm (D).
- Max. Number of Internals: 3.
- Max. Loading of Chamber: 60 kg.
- Max. Loading Per Internal: 20 kg.
External Casing:
- Material: Textured stainless steel.
- Dimensions: 585 mm (W) x 704 mm (H) x 434 mm (D) (+56 mm for door handle).
- Rear Housing: Zinc-plated steel.
Electrical Data:
- Voltage & Electrical Load:
- 230 V, 50/60 Hz, approx. 1600 W.
- 115 V, 50/60 Hz, approx. 1600 W.
Ambient Conditions:
- Clearance Requirements:
- Rear clearance: at least 15 cm.
- Ceiling clearance: at least 20 cm.
- Side clearance from walls or nearby appliances: at least 5 cm.
- Maximum Altitude: 2,000 m above sea level.
- Operating Temperature: +5°C to +40°C.
- Maximum Humidity: 80% RH, non-condensing.
- Overvoltage Category: II.
- Pollution Degree: 2.
Packing/Shipping Data:
- Transport Information: Appliances must be transported upright.
- Customs Tariff Number: 8419 8998.
- Country of Origin: Federal Republic of Germany.
- WEEE Registration Number: DE 66812464.
- Dimensions (Including Carton): 660 mm (W) x 890 mm (H) x 650 mm (D).
- Net Weight: Approx. 45 kg.
- Gross Weight (with Carton): Approx. 61 kg.
