Analytical Balances AP135W-AD Shimadzu

Jual Analytical Balances AP135W-AD Shimadzu

*1 Models with a minimum display of 0.01 mg come with two internal weights as standard.

*2 Measurement conditions for the W-AD series (0.01 mg models only) include:

• Setting the adjustable windbreak plate to its lowest position
• Configuring a shield plate around the pan

*3 Complies with USP Chapter 41. The tested value is determined by using 5% of the balance’s capacity (or a 5-gram weight). The minimum weight value may vary depending on the installation environment, so it must be measured in the actual usage environment.

*4 The response time for displaying 90% of the added sample amount in trace measurements (starting from 1 mg).

*5 The response time value is typical.

*6 Non-condensing conditions.

*7 Depends on the attached AC adapter.

Analytical Balances AP135W-AD Shimadzu Spesifications:

Capacity: 135g
Minimum Display: 0.1mg / 0.01mg
Calibration Weight: Built-in (*1)
External Calibration Weight Range for Span Calibration (Recommended weight value): 45 to 135.00090g (100g)
Repeatability (at weighing capacity) (*2): 0.05mg
Repeatability (for low loads) (*2, *3): 0.1mg (for 20g load)
Minimum Weight (*2, *3): 200mg
Linearity (*2): ±0.2mg / ±0.1mg
Response Time for Trace Measurements (*4, *5): 2 sec.
Response Time (*5): 8 sec.
USB Host (Type A): Yes
USB Device (Type B): Yes
Recipe Compounding: Yes
HPLC Buffer Solution Preparation: Yes
mol Conversion Function: Yes
Sample (Concentration) Preparation: Yes
Inspection Support Function: Yes
Clock-CAL: Yes
Automatic Doors: Yes
Touchless Sensors: Yes
Adjustable Windbreak Plate: No
Ionizer: Yes
Operational Temperature / Humidity Range: 5 to 40℃ at 20 to 85% RH (*6)
Sensitivity Stability Against Temperature Range: ±2ppm / ℃ (10～30℃)
Pan Size: Approx. 91 mm dia.
Body Dimensions: Approx. W215 × D367 × H346 mm
Weight: Approx. 8.6kg
Display: OEL display (dot matrix)
Rated Electric Power Supply: DC12V 1.5A
Power Supply Input (AC Adapter): AC100-240V 480mA 50/60Hz (*7)
Input / Output Terminal: RS-232C (D-Sub 9P plug), USB host (Type A), USB device (Type B), Ionizer