Analytical Balances AP225W-AD Shimadzu

Jual Analytical Balances AP225W-AD Shimadzu

*1 Minimum display 0.01 mg models provide two internal weights as standard.

*2 Measurement conditions of W-AD series (0.01 mg models only) are as follows.
– Set the adjustable windbreak plate in the lowest position
– With a shield plate configured around the pan

*3 Be compliant with USP Chapter 41. This is the tested value by the weight of the balance’s capacity of 5 % (or 5 grams’ weight)
The minimum weight value is affected by the installation environment, so it is necessary to measure it in the actual environment of use.

*4 The response time for displaying 90 % of the added sample amount value in trace measurements (from 1 mg).

*5 The response time value is typical.

*6 Non-condensing.

*7 Depending on the attached AC adapter.

Analytical Balances AP225W-AD Shimadzu Spesifications :

Model: AP225W-AD

Capacity: 220g
Minimum Display: 0.01mg
Calibration Weight: Built-in (*1)
External Calibration Weight Range for Span Calibration (Recommended weight value): 95 to 220.00090g (200g)
Repeatability (at weighing capacity) (*2): 0.015mg (up to 20g), 0.03mg (up to 100g), 0.05mg (up to 200g)
Repeatability (for low loads) (*2, *3): 0.01mg (for 5g load)
Minimum Weight (*2, *3): 20mg (*2)
Linearity (*2): ±0.1mg
Response Time for Trace Measurements (*4, *5): 2 sec.
Response Time (*5): 8 sec.
USB Host (Type A): Yes
USB Device (Type B): Yes
Recipe Compounding: Yes
HPLC Buffer Solution Preparation: Yes
mol Conversion Function: Yes
Sample (Concentration) Preparation: Yes
Inspection Support Function: Yes
Clock-CAL: Yes
Automatic Doors: Yes
Touchless Sensors: Yes
Adjustable Windbreak Plate: Yes
Ionizer: Yes
Operational Temperature / Humidity Range: 5 to 40℃ at 20 to 85% RH (*6)
Sensitivity Stability Against Temperature Range: ±2ppm / ℃ (10～30℃)
Pan Size: Approx. 91 mm dia.
Body Dimensions: Approx. W215 × D411 × H346 mm (power supply unit included)
Weight: Approx. 9.7kg
Display: OEL display (dot matrix)
Rated Electric Power Supply: DC12V 1.5A
Power Supply Input (AC Adapter): AC100-240V 480mA 50/60Hz (*7)
Input / Output Terminal: RS-232C (D-Sub 9P plug), USB host (Type A), USB device (Type B), Ionizer