Incubator Memmert IN30 Standard delivery Incubator

Jual Incubator Memmert IN30 Standard delivery Incubator

IN30 Standard Delivery Incubator

The IN30 standard delivery incubator is designed for precise heating, utilizing natural convection, ideal for applications in research, pharmaceutics, medicine, and food chemistry.

Incubator Memmert IN30 Standard delivery Incubator Spesifications :

Temperature

• Setting Temperature Range: +20 to +80 °C
• Working Temperature Range: At least 5 °C above ambient temperature to +80 °C
• Setting Accuracy: 0.1 °C
• Temperature Sensor: 1 Pt100 sensor, DIN class A, in a 4-wire circuit

Control Technology

• Language Settings: German, English, Spanish, French, Polish, Czech, Hungarian
• ControlCOCKPIT: SingleDISPLAY with an adaptive multifunctional digital PID microprocessor controller and high-definition TFT color display
• Timer: Digital backward counter, adjustable from 1 minute to 99 days
• Function SetpointWAIT: Process time starts only when the set temperature is reached
• Calibration: Three freely selectable temperature values
• Adjustable Parameters: Temperature (Celsius or Fahrenheit), air flap position, program time, time zones, summertime/wintertime

Ventilation

• Convection: Natural convection
• Fresh Air: Pre-heated fresh air admixture via electronically adjustable air flap
• Vent: Vent connection with restrictor flap

Communication

• Documentation: Program stored in case of power failure
• Programming: AtmoCONTROL software for data logger management via Ethernet interface (temporary trial version available for download). USB stick with AtmoCONTROL software available as an accessory.

Safety

• Temperature Control: Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 per DIN 12880, to switch off heating about 20°C above nominal temperature
• Autodiagnostic System: For fault analysis

Standard Equipment

• Calibration Certificate: Includes works calibration certificate for +37°C
• Door: Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
• Internals: 1 electropolished stainless steel grid
• Interior: Easy-to-clean stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
• Volume: 32 liters
• Dimensions (Interior): 400 x 320 x 250 mm (w x h x d)
• Max. Internals: 3
• Max. Chamber Loading: 60 kg
• Max. Loading per Internal: 20 kg

Housing

• Textured Stainless Steel Casing
• Dimensions (Exterior): 585 x 704 x 434 mm (w x h x d) (d +56mm door handle)
• Rear: Zinc-plated steel

Electrical Data

• Voltage and Electrical Load:
  • 230 V, 50/60 Hz, approx. 1600 W
  • 115 V, 50/60 Hz, approx. 800 W

Ambient Conditions

• Setup: Minimum distances: 15 cm from the wall, 20 cm from the ceiling, 5 cm from walls or nearby appliances
• Installation Altitude: Max. 2,000 m above sea level
• Ambient Temperature: +5 °C to +40 °C
• Humidity (RH): Max. 80%, non-condensing
• Overvoltage Category: II
• Pollution Degree: 2

Packing/Shipping Data

• Transport Information: Must be transported upright
• Customs Tariff Number: 8419 8998
• Country of Origin: Federal Republic of Germany
• WEEE-Reg.-No.: DE 66812464
• Dimensions (Including Carton): 660 x 890 x 650 mm
• Net Weight: Approx. 48 kg
• Gross Weight (Carton): Approx. 64 kg