Micro balance AND LCCA21N500

Micro balance AND LCCA21N500

The Micro balance AND LCCA21N500 is a compact compression-type load cell featuring a built-in analog amplifier, ideal for applications requiring accurate and stable force measurement with simplified integration. With a rated capacity of 500 N (approximately 51 kg), it provides an amplified analog output of 1 to 4 V, suitable for direct connection to control systems or data acquisition units—no external signal conditioner needed.

Equipped with IP64 protection, stable thermal performance, and standard mounting accessories, the LCCA21N500 is a robust and ready-to-install solution for applications such as press force monitoring, component testing, load distribution analysis, and robotic feedback systems.

Key Features

• Compression-Type Load Cell
  Designed for measuring vertical compressive forces in industrial and automated settings.

• Rated Capacity:
  500 N (≈51 kg) — suitable for medium-force applications such as press-fit monitoring, spring compression, or embedded robotic sensing.

• Built-in Amplifier with Analog Output

  • Output: 1–4 V

    • 0% Load = 1 V

    • 100% Load = 3 V

    • 150% Load = 4 V

  • Eliminates need for external amplifier or signal conditioner.

• Stable Power Requirements

  • Supply Voltage: 5 V DC ± 0.25 V

  • Power Consumption: ≤ 16 mA

  • Load Resistance: ≥ 5 kΩ

• Excellent Environmental & Thermal Performance

  • IP64 dustproof/water-resistant

  • Operating Range: –10 to 80°C

  • Temperature Compensated Range: 0 to 70°C

  • Temperature Effect (Zero/Span): 0.6% R.O. / 10°C (typical)

• Safe Load Limit:
  Handles up to 150% of Rated Capacity without damage.

• High-Fidelity Frequency Response

  • 100 Hz (–3 dB), suitable for most dynamic yet moderate-speed measurements.

• Accessories Included:

  • 1 Standard Attachment Holder

  • 1 Amplifier Case Holder

Cable Configuration

• From Load Cell to Amplifier: Ø2 mm, 2 meters

• From Amplifier to Output: Ø6 mm, 0.5 meters

• Wiring Colors:

  • Red: Power +

  • White: Power –

  • Green: Output +

  • Blue: Output –

  • Yellow: Shield

Applications

• Press Force Measurement – In mechanical presses, tablet presses, or stamping tools.

• Component & Spring Testing – In labs or QA lines to assess material compression forces.

• Load Distribution Monitoring – Used in structural setups to check for uniform force distribution.

• Embedded Robotic Force Feedback – Ideal for integration into end-effectors or grippers.

• Switch & Button Pressure Sensing – In electronics testing or keyboard validation setups.

Technical Summary