Soil Test Direct Soil EC Tester Hanna HI98331

Soil Test Direct Soil EC Tester Hanna HI98331

The Soil Test Direct Soil EC Tester Hanna HI98331 is equipped with a stainless steel penetration electrode, enabling direct measurements in soil. Calibration is simple: submerge the electrode tip into the calibration solution and enter calibration mode for automatic one-point calibration.

Electrolytic conductivity (EC) is a measure of concentration, indicating the movement of electrical charges of particles in a medium under the influence of a potential difference. It is nonspecific for ion type. Ions, charged particles in a solution, contribute to current flow

Electrical conductance is the reciprocal of electrical resistance, depending on the geometric dimensions of the substance being measured. Conductivity and resistivity are normalized terms used to denote a substance’s bulk intrinsic property. Standardized EC probes on Conductivity or resistivity meters provide these measurements.

Features at-a-glance:

• One-point calibration
• Automatic calibration to 1413 µS/cm conductivity standard
• Automatic Temperature Compensation (ATC)
• Fixed 2%/°C temperature correction coefficient
• Stainless steel penetration electrode for direct soil measurement

Spesifications :

• SKU: HI98331
• Product Name: Soil Test™ Direct Soil EC Tester – HI98331
• Quote Required: Yes
• EC Range:
  • 0 to 4000 μS/cm
  • 0.00 to 4.00 mS/cm (dS/m)
• EC Resolution:
  • 1 μS/cm
  • 0.01 mS/cm (dS/m)
• EC Accuracy:
  • ±50 μS/cm (0 to 2000 μS/cm)
  • ±300 μS/cm (2000 to 4000 μS/cm)
  • ±0.05 mS/cm (0.00 to 2.00 mS/cm)
  • ±0.30 mS/cm (2.00 to 4.00 mS/cm)
• EC Calibration: automatic, one-point at 1.41 mS/cm
• EC/TDS Temperature Compensation: automatic, temperature coefficient (β) fixed 2% / °C
• Temperature Range: 0.0 to 50.0°C
• Temperature Resolution: 0.1°C
• Temperature Accuracy: ±1°C
• EC/TDS Probe: 114 mm (4.5 inches) Stainless steel penetration
• Battery Type/Life: CR2032 Li-ion, approximately 100 hours of continuous use
• Environment: 0 to 50°C (32 to 122°F); RH max 95% non-condensing
• Dimensions: 50 x 196 x 21 mm (2.0 x 7.7 x 0.9 inches)
• Weight: 74 g (2.4 oz.)
• Ordering Information: HI98331 is supplied with a stainless steel penetration probe, batteries, and instrument quality certificate.