Standgas HC Pro detector explosive gases Duran Electronica

Standgas HC Pro detector for explosive gases Duran Electronica
The STANDGAS HC PRO is an independent detector designed to identify explosive gases using catalytic technology. It operates without the need for a control panel and features a relay output.

Key Features:

• Stand-alone Operation: Does not require a control panel.
• Gas Detection Range: 0 to 100% L.E.L.
• Available Gases: Methane, hydrogen, methanol, ethane, ethanol, ethylene, propane, propylene, acetone, ammonia, cyclohexane, cyclopentane, dioxane, ethyl acetate, isopropyl alcohol, methyl ethyl ketone, butane, hexane, pentane, propanol, butyl acetate, iso-octane, heptane, toluene, xylene, benzene, kerosene, acetic acid, decane, isobutyl alcohol, nonane, styrene, and methyl isobutyl ketone. Special version available for acetylene detection.
• Gas Selection: Automatic gas detection via a jumper-based protocol.
• Optical Indicators: Displays status and sensor faults.
• Relay Output: One programmable relay output with two levels (20% L.E.L and 50% L.E.L), with options for instantaneous or delayed disconnection, and programmable disconnection delay.
• Power Supply: Operates on 10V to 30V DC.
• Encapsulation: Sensor and compensator are independently encapsulated for enhanced linearity and stability.
• Filter: Equipped with a sintered filter.
• Calibration: Factory-calibrated with target gas; no need for recalibration upon installation.
• Maintenance: Simple verification and maintenance procedures.

Standgas HC Pro detector for explosive gases Duran Electronica Specifications:

• Technology: Catalytic sensor with microprocessor
• Voltage Supply: 10V to 24V DC (2-wire)
• Current Consumption: 110 mA at 12V DC
• Measurement Range: 0-100% L.E.L
• Resolution: ±1% L.E.L.
• Zero Deviation: ±7mV/year
• Span Deviation: ±9% L.E.L./year
• Stabilization Time: <15 minutes
• Response Time: T50/T90 of 3s & 8s, respectively
• Useful Life: Approx. 4 years under normal conditions
• Maintenance: Recommended annually
• Humidity Range: 0 to 90% RH, non-condensing
• Temperature Range: -10°C to +50°C
• Atmospheric Pressure: 80 to 110 kPa
• Alarm Relay Output: Dry contact, 3A 250V AC
• Coverage Area: Approximately 16 m²
• Protection Grade: IP65
• Materials: Makrolon & ABS
• Dimensions: 120 x 160 x 60 mm
• Weight: 288 grams

Applications:

• Battery Rooms
• Pharmaceutical and University Laboratories
• Aeronautical Industry
• Galleries and Distilleries
• Livestock Farms
• Petrol Stations
• Boiler Rooms
• Industrial Kitchens
• General Industry

Available Gases:

• Methane – Natural Gas (CH₄)
• Hydrogen (H₂)
• Methanol (CH₄O)
• Ethane (C₂H₆)
• Ethanol (C₂H₆O)
• Ethylene (C₂H₄)
• Propane (C₃H₈)
• Propylene (C₃H₆)
• Acetone (CH₃(CO)CH₃)
• Ammonia (NH₃)
• Cyclohexane (C₆H₁₂)
• Cyclopentane (C₅H₁₀)
• Dioxane (C₄H₈O₂)
• Ethyl Acetate (CH₃COOCH₂CH₃)
• Isopropyl Alcohol (IPA) (C₃H₇OH)
• Methyl Ethyl Ketone (MEK)
• Butane (C₄H₁₀)
• Hexane (C₆H₁₄)
• Pentane (C₅H₁₂)
• Propanol (C₃H₇OH)
• Butyl Acetate (CH₃COO(CH₂)₃CH₃)
• Iso-Octane (C₈H₁₈)
• Heptane (C₇H₁₆)
• Toluene (C₆H₅CH₃)
• Xylene (C₆H₄(CH₃)₂)
• Benzene (C₆H₆)
• Kerosene
• Acetic Acid (CH₃COOH)
• Decane (C₁₀H₂₂)
• Isobutyl Alcohol ((CH₃)₂CHCH₂OH)
• Nonane (C₉H₂₀)
• Styrene (C₈H₈)
• Methyl Isobutyl Ketone (C₆H₁₂O)

A special version is available for Acetylene (C₂H₂).