Steriliser SF750 Memmert Single DISPLAY

Jual Steriliser SF750 Memmert Single DISPLAY

Steriliser SF750 Memmert Single DISPLAY Standard Delivery Steriliser

The SN55plus is a hot air steriliser designed for precise and reliable sterilisation. The Setpoint Wait feature ensures the programme starts only after the set temperature is reached, ensuring consistent and effective sterilisation.

Temperature Specifications

• Setting Temperature Range: +20 to +250 °C
• Setting Accuracy Temperature: Up to 99.9 °C: 0.1 / from 100 °C: 0.5
• Working Temperature Range: At least 10 °C above ambient temperature to +250 °C
• Temperature Sensor: 1 Pt100 sensor DIN class A in 4-wire circuit

Control Technology

• ControlCOCKPIT: SingleDISPLAY, adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display
• Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
• Function SetpointWAIT: Process time does not start until the set temperature is reached
• Calibration: Three freely selectable temperature values
• Adjustable Parameters: Temperature (Celsius or Fahrenheit), fan speed, air flap position, programme time, time zones, summertime/wintertime

Ventilation

• Fan: Forced air circulation by 2 quiet air turbines, adjustable in 10 % steps
• Fresh Air: Admixture of pre-heated fresh air by electronically adjustable air flap
• Vent: Vent connection with restrictor flap

Communication

• Documentation: Programme stored in case of power failure
• Programming: AtmoCONTROL software for reading out, managing, and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand)

Safety

• Temperature Control: Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approximately 20 °C above nominal temperature
• Autodiagnostic System: For fault analysis

Standard Equipment

• Works Calibration Certificate: Calibration at +160 °C
• Door: Fully insulated stainless steel doors with 2-point locking (compression door lock), lockable
• Internals: 2 electropolished stainless steel grids
• Stainless Steel Interior: Easy-to-clean, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
• Volume: 749 l
• Dimensions (Interior): 1040 x 1200 x 600 mm (depth less 39 mm for fan)
• Max. Number of Internals: 14
• Max. Loading of Chamber: 300 kg
• Max. Loading per Internal: 30 kg
• Textured Stainless Steel Casing
• Dimensions (Exterior): 1224 x 1720 x 784 mm (depth +56 mm door handle)
• Installation: On lockable castors
• Housing: Rear zinc-plated steel

Electrical Data

• Voltage Electrical Load: 400 V and 3x 230 V w/o neutral, 50/60 Hz, approx. 7000 W

Ambient Conditions

• Setup: Minimum distance of 15 cm from the wall, 20 cm from the ceiling, and 5 cm from side walls or nearby appliances
• Altitude of Installation: Max. 2,000 m above sea level
• Ambient Temperature: +5 °C to +40 °C
• Humidity RH: Max. 80 %, non-condensing
• Overvoltage Category: II
• Pollution Degree: 2

Packing/Shipping Data

• Transport Information: Appliances must be transported upright
• Customs Tariff Number: 8419 8998
• Country of Origin: Federal Republic of Germany
• WEEE-Reg.-No.: DE 66812464
• Dimensions (Including Carton): 1330 x 1910 x 1050 mm
• Net Weight: Approx. 217 kg
• Gross Weight (Carton): Approx. 288 kg