Jual W Series Analytical Balances Shimadzu AP225W, AP135W, AP125WD, AP225WD, AP124W, AP224W, AP324W
- Models with a minimum display of 0.01 mg come with two internal weights as standard.
- Compliant with USP Chapter 41, tested using a weight equal to 5% of the balance’s capacity (or a 5-gram weight). The minimum weight value is influenced by the installation environment, so it must be measured in the actual usage environment.
- The value is based on tests conducted with the internal windbreak plate.
- The response time for showing 90% of the added sample amount in trace measurements (starting from 1 mg).
- The response time value is an average.
- Non-condensing conditions required.
- Dependent on the attached AC adapter.
W Series Analytical Balances Shimadzu Spesifications:
Models: AP225W, AP135W, AP125WD, AP225WD, AP124W, AP224W, AP324W
- Capacity: 220g, 135g, 120g / 52g, 220g / 102g, 120g, 220g, 320g
- Minimum Display: 0.01mg, 0.1mg / 0.01mg, 0.1mg
- Calibration Weight: Built-in (*1)
- External Calibration Weight Range for Span Calibration (Recommended weight value):
- 95 to 220.00090g (200g)
- 45 to 135.00090g (100g)
- 45 to 120.00090g (100g)
- 95 to 220.00090g (200g)
- 45 to 120.00090g (100g)
- 95 to 220.00090g (200g)
- 95 to 320.00090g (300g)
- Repeatability (at weighing capacity) (*3):
- 0.015mg (up to 20g)
- 0.03mg (up to 100g)
- 0.05mg (up to 200g)
- 0.05mg
- 0.1mg / 0.02mg
- 0.1mg / 0.05mg
- 0.1mg
- 0.15mg
- Repeatability (for low loads) (*2, *3):
- 0.01mg (for 5g load)
- 0.1mg (for 5g load)
- 0.1mg (for 10g load)
- 0.1mg (for 20g load)
- Minimum Weight (*2, *3): 20mg, 200mg
- Linearity (*3): ±0.1mg, ±0.2mg / ±0.05mg, ±0.2mg / ±0.1mg, ±0.2mg, ±0.3mg
- Response Time for Trace Measurements (*4, *5): 2 sec.
- Response Time (*5): 8 sec., 2 sec. / 8 sec., 2 sec.
- USB Host (Type A): Yes
- USB Device (Type B): Yes
- Recipe Compounding: Yes
- HPLC Buffer Solution Preparation: Yes
- mol Conversion Function: Yes
- Sample (Concentration) Preparation: Yes
- Inspection Support Function: Yes
- Clock-CAL: Yes
- Internal Windbreak Plate: Yes, Yes (optional)
- Ionizer (optional): Yes
- Operational Temperature / Humidity Range: 5 to 40℃ at 20 to 85% RH (*6)
- Sensitivity Stability Against Temperature Range: ±2ppm/℃ (10～30℃)
- Pan Size: Approx. 91 mm dia.
- Body Dimensions: Approx. W213 × D411 × H345 mm (power supply unit included), Approx. W213 × D367 × H345 mm
- Weight: Approx. 7.9 kg, Approx. 7.0 kg
- Display: OEL display (dot matrix)
- Rated Electric Power Supply: DC12V 1.0A
- Power Supply Input (AC Adapter): AC100 – 240 V / 320mA / 50/60Hz
- Input / Output Terminal: RS-232C (D-Sub 9P plug), USB host (Type A), USB device (Type B), Ionizer
Be the first to review “W Series Analytical Balances Shimadzu”
You must be logged in to post a review.
Reviews
There are no reviews yet.