Water Bath WTB11 Memmert

Jual Water Bath WTB11 Memmert

Water Bath WTB11 Memmert  Spesifications :

Temperature Sensor: Digital temperature sensor mounted on the exterior of the bath.

Temperature Setting: Options for Celsius and Fahrenheit.

Working Temperature Range: From at least 5°C above ambient up to +100°C (with cover, depending on ambient pressure).

Setting Temperature Range: +10°C to +100°C.

Setting Accuracy: 0.1°C.

Control Technology

Calibration: 2-point calibration.

Controller: Intuitive 3.5″ color graphic display with touch screen.

Controller Display: Digital display showing the set and actual temperature, as well as the remaining program time.

Safety

Temperature Control:

• Two-stage safety system to prevent overheating (pressure sensor for level monitoring, thermal fuse for heating shutdown in case of error).
• Individually adjustable overtemperature alarm, with both visual and acoustic alerts.
• Independent temperature limiter to switch off the heating in case of failure.

Autodiagnostic System: Microprocessor PID-temperature controller with integrated autodiagnostic system and fault indicator.

Heating Concept

Heating: Corrosion-proof, large-area heating located on the outside of the interior.

Standard Equipment

Cover: Stainless steel gable cover.

Drain System: Innovative drain system for easy emptying.

Timer: Digital timer ranging from 1 minute to 99 hours and 59 minutes, with both visual and acoustic signals.

Stainless Steel Interior

Interior: Deep-drawn stainless steel tray (stainless steel W.St. 1-4301), designed without corners and edges for easy cleaning, including a central drain (no disturbing installations).

Interior Dimensions: (l) 267 mm x (w) 207 mm x (h) 200 mm.

Volume: 10 liters.

Liquid Level:

• Minimum: 40 mm.
• Maximum: 164 mm.

Textured Stainless Steel Casing

Casing Dimensions: (l) 479 mm x (w) 289 mm x (h) 425 mm.

Electrical Data

Voltage and Electrical Load:

• 230 V, 50/60 Hz, approximately 1000 W.
• 115 V, 50/60 Hz, approximately 1000 W.

Ambient Conditions

Installation Requirements:

• Vent openings on the left and back must remain unobstructed.
• Minimum distance to the wall: 100 mm on the sides, 150 mm to the rear.
• Minimum spacing from the top of the bath to the next ceiling: 750 mm.

Ambient Temperature: +5°C to +40°C.

Humidity: Maximum 80%, non-condensing.

Overvoltage Category: II.

Pollution Degree: 2.

Water Bath WTB11 Memmert

Packing/Shipping Data:

• Dimensions including carton: (l) 579 mm x (w) 389 mm x (h) 525 mm.

Transport Information: Appliances must be transported upright.

Customs Tariff Number: 8419 8998.

Country of Origin: Federal Republic of Germany.

WEEE-Reg.-No.: DE 66812464.

Net Weight: Approximately 12 kg.

Gross Weight with Carton: Approximately 14 kg.